How we heat our homes has a direct impact on the quality of air that we breathe. This impacts on our health. The impact is both local and national. Burning solid fuel – in an open fireplace or stove – generates fine particle pollution which affects the air in our own home and in the local neighbourhood. There are choices and actions we can take that will reduce this pollution.

In the early stages of the Covid-19 crisis, there was little official recognition that airborne transmission was a risk. Has that view changed, and what role will building ventilation play when winter approaches?

The UN’s Scott Foster says deep retrofit of our building stock, and a sustainable built environment, should be at the heart of our recovery from the Covid-19 pandemic.

With governments across Europe looking for ways to jump start their economies following the early impact of Covid-19, attention is increasingly turning to deep retrofit. But while there is strong evidence that deep retrofit could play a major role, the devil will be in the detail – and the challenge of dramatically upscaling a nascent industry shouldn’t be underestimated.

Built mostly with clay blocks and sited above the sandy shores of Seaton, on the Devon coast, this new development of eight high-end apartments not only meets the passive house ‘plus’ standard — meaning it pairs the requisite ultra-low energy fabric with a substantial amount of renewable energy generation — but it also boasts serious attention to the use of ecological and healthy material.

This issue features the passive house ‘plus’ certified headquarters of Métropole Rouen Normandie, located on the banks of the Seine in Rouen, France, and designed by Jacques Ferrier Architecture.

This inspiring project may be exactly what the deep retrofit sector needs: an example of how to turn a bog standard, cold suburban home of little architectural merit into a climate champion delivering outstanding levels of energy performance, comfort and health, all while transforming the building architecturally.

A rundown 1970s scheme of one-bedroom, single storey social housing units in Ballyshannon, Co Donegal, has been transformed into a pioneering development of cosy, A-rated, NZEB-busting homes. The pioneering project – the first completed under Ireland’s deep retrofit pilot scheme – also breathed new life into an unloved green area and is expected to help fuel a regeneration project in the town.

Even though its stunning views lay directly northward, simple design, good detailing and lots of insulation have turned this 1960s semi on the edge of Dublin Bay into a warm and light-filled low energy home.

Cement is responsible for up to 8% of global carbon emissions, and in this guide, sustainable design expert Jay Stuart looks at ways to minimise its environmental impact through good design, and at some of the alternative, lower carbon cement and concrete products on the market.

When it comes to air pollution, we tend to worry most about things like traffic fumes and solid fuel burning — or when it comes to indoor air, condensation, damp and mould. But one of the biggest threats in the air we breathe comes from something we are exposed to almost every day, but rarely think about: cooking. John Hearne reports on the evidence for how cooking affects indoor air quality, and what we can do about it.

In the early stages of the Covid-19 crisis, there was little official recognition that airborne transmission was a risk. Has that view changed, and what role will building ventilation play when winter approaches?

‘Architecture is the blissful moment when the site and brief come together,’ says architect Ruth Butler of the challenge she and her engineer husband faced in designing their family home, on a difficult urban site by the Hampshire coast. But it was a challenge they met and exceeded, because even though they hadn’t even planned to build a passive house, they soon realised the design was on course to meet the onerous energy standard anyway.

Sited on the side of a hill in the west of Ireland, a new home that meets the NZEB and passive house standards boasts a locally-made and super-insulated timber-frame, and is designed to fold cleverly into the rural landscape.

A ground-breaking new passive house in Bristol makes superb use of an urban plot to create a bright and spacious home built from ecological materials that — thanks to its huge solar roof and Tesla battery pack — produces more energy than it uses, making it one of the first UK projects to meet the passive house ‘plus’ standard, while also blitzing the RIBA 2030 Climate Challenge’s targets for operational energy.

This issue features an off-grid passive house situated on a ten-acre vineyard, in south-eastern Australia.

This ambitious renovation and extension of a single-storey Dublin redbrick, bringing it up to an A1 rating while far exceeding the new build NZEB standard, provides a beautifully-detailed blueprint for delivering warmth, comfort, and healthy indoor air — as well as extra space and living density — in historic city centre properties.

When Welsh sustainable building specialists PYC decided to start making their own timber frames, they got down to work designing and building their own factory. Once that was finished, it was time to test their system on their first order: to build their own passive house certified offices right next door – and to be bold enough to decide not to install central heating.

There is no shortage of anecdotal evidence that home energy retrofits, done well, can improve the health of those who receive them — and equally there are horror stories about shoddy upgrades causing damp, mould and illness. But what does the evidence say about how energy upgrades effect occupant health, and what lessons can be learned for the future of how we renovate our homes? Kate de Selincourt reports.

Flat-pack furniture has become a fixture of modern living, but what happens when the same concept is applied to housing – and when the client is an architect seeking to build to passive house and nearly zero energy building levels?

Early in October, Norwich City Council’s Goldsmith Street development become both the first passive house and the first social housing project to win the Stirling Prize, British architecture’s most coveted award, with the judges calling it “high-quality architecture in its purest, most environmentally and socially conscious form”. Leading building energy expert Dr Peter Rickaby visited the scheme for Passive House Plus to see this ground-breaking project for himself.

The deep and comprehensive refurbishment of the Miesian Plaza complex on Dublin’s Baggot Street provides a radical blueprint for how to transform mid-20th century city office buildings into comfortable, healthy and super low energy spaces that support sustainable transport and working patterns.

Over the last decade, Cosgrave Developments have set about building a new neighbourhood near the south Dublin seaside town of Dún Laoghaire. Honey Park and Cualanor are two adjacent schemes comprising nearly 2,000 low energy homes, one of which houses this magazine’s editor, who has found a scheme with green credentials that go far beyond a good energy rating.

The unique split-level, wedge-shaped plan of this striking and award-winning new passive house in Cork isn’t just for show — it is a carefully thought-out response to an extremely challenging site, and an example of how great architecture can create beautiful, sustainable buildings in even the most unlikely of spaces, and with a fraction of the upfront carbon costs of traditional build methods.